4 Measured Quantities and Recording
4.1 Power Quality Measuring System and Recording System
38 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
*
)
For detailed information on the load profile, refer to chapter 5.
The respective measuring interval of the recording is time-stamped to enable a correct time evaluation.
Fault recorder
Voltages,
Currents,
Binary
Voltage/current/binary
variation triggers,
acquisition of sampled values
(max. 3 s)
Analyzing the causes of
power quality problems
Mains signaling
voltage recorder
Mains signaling
voltages on the supply
voltage
Mains signaling voltage
triggers, start time, acquisition
of 10/12 cycle voltages (max.
2min)
Monitoring of the mains
signaling voltage according
to EN 50160
Load profile re-
cording *
)
Load profile
Method Fixed Block or
method Rolling Block
Determining the load profile
for supply and consumption
of electric power
Table 4-2 Recording Measured Values (cont.)
Recording
Measured quantity
Storage interval/storage
method
Application
MAN_SICAM_Q100_US.book Page 38 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
