16 Operating Parameters
16.4 Energy Management
410 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
16.4 Energy Management
16.4.1 Load Profile
16.4.2 Tariffs (TOU)
Parameter Default Setting Setting Range
Subperiode time 15 minutes 1 min to 6 min in 1-min steps, 10 min, 12 min,
15 min, 20 min, 30 min, 60 min
Number of subperiods 1 1 to 5
Synchronization source Internal clock None
Protocol
Binary input 1
Binary input 2
Internal clock
Kind of used reactive
power
Q1 Q1
Qn
Qtot
Parameter Default Setting Setting Range
Synchronization source Protocol Protocol
1)
Binary input 1
2)
Binary input 2
2)
Calendar
The following parameters are available only when Synchronization source is set to Calendar.
Season 1 Start 01-01 01-01 to 12-31
Season 1 End 06-30 01-01 to 12-31
Season 2 Start 07-01 Not settable
The rest days of the full year
Season 2 End 12-31
Weekend Setting Thursday and Friday Sunday to Saturday, max. 2 days
Season x (x = 1 or 2) Tariff
y (y = 1 to 8) Period 1 Start
00:00 00:00 to 23:45
Season x (x = 1 or 2) Tariff
y (y = 1 to 8) Period 1 End
24:00 00:15 to 24:00
Season x (x = 1 or 2) Tariff
y (y = 1 to 8) Period 2 Start
00:00 00:15 to 23:45
Season x (x = 1 or 2) Tariff
y (y = 1 to 8) Period 2 End
24:00 00:30 to 24:00
MAN_SICAM_Q100_US.book Page 410 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
