Siemens SICAM Q100 7KG95 Series - Energy Upper Limit; Energy Freeze and Record

16 Operating Parameters
16.4 Energy Management
411SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
1)
In this case, the protocol Modbus TCP can control tariff 1 to tariff 8. Refer to the System Manual SICAM
Q100, chapter 2.2.7.18 Register 0154: Tariffs (read and write), order number E50417-C1040-C522.
2)
This synchronization source can only control tariff 1 or tariff 2.
3)
The default settings of Tariff 1 Period 1 Active for 2 seasons are checked.
16.4.3 Energy Upper Limit
16.4.4 Energy Freeze and Record
Season x (x = 1 or 2) Tariff
y (y = 1 to 8) Period 1 Active
No
3)
Yes
No
Season x (x = 1 or 2) Tariff
y (y = 1 to 8) Period 2 Active
No Yes
No
Season x (x = 1 or 2) Tariff
y (y = 1 to 8) Workday/
Weekend Selection
Every Day Every Day
Workday
Weekend
Coverage Check Pass
Fail (with gap)
Fail (with overlap)
Parameter Default Setting Setting Range
Energy Upper Limit Energy Counter Energy Counter
Energy Value
Parameter Default Setting Setting Range
Interval 10 minutes 10 minutes
15 minutes
30 minutes
60 minutes
MAN_SICAM_Q100_US.book Page 411 Wednesday, June 5, 2019 9:31 AM