EasyManua.ls Logo

Siemens SICAM Q100 7KG95 Series - Page 443

Siemens SICAM Q100 7KG95 Series
448 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
443SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
MBAP Header Header of a Modbus TCP message consisting of these 4 parts: Transaction
identifier (2 bytes), protocol identifier (2 bytes), length (2 bytes), unit identifier
(1 byte).
MIB Management Information Base: Information which can be retrieved or mod-
ified via the SNMP network management protocol
Modbus The Modbus protocol is a communication protocol based on a client-server
architecture.
Modbus RTU Modbus Remote Terminal Unit: Modbus protocol type for transmitting data
over serial networks (e.g. RS485)
Modbus TCP Modbus Transmission Control Protocol: Modbus protocol type for transmit-
ting data as TCP/IP packets; TCP port 502 is reserved for Modbus TCP.
MSB Most Significant Bit
MSV Mains Signaling Voltage
N
NaN Not a Number means "invalid": Result of an invalid computing operation
NTP Network Time Protocol: Standard for synchronizing clocks in computer sys-
tems using packet-based communication networks
P
PQ Power Quality
R
Response timeout Time within which the Modbus slave has to respond to a request from Mod-
bus Master
RJ45 Ethernet plug connector
RS485 Interface standard for digital, wire-based, differential, serial data transmis-
sion
RTC Real-Time Clock
RTU See Modbus Remote Terminal Unit
RVC Rapid Voltage Change
S
Server Sends data upon request by the client
SNMP Simple Network Management Protocol: Serves for monitoring and control-
ling network elements of a central station
SNTP Simple Network Time Protocol: Simplified version of the NTP
SW Software: Program executed on a computer
Software filter time The software filter time has the effect that temporary switchover (L ®H, H
®L) at the binary inputs is not detected as real switchover (debouncing).
STP Shielded twisted-pair is the cable for 100Base-T (Ethernet).
Stratum Each NTP server is synchronized by a high-precision time standard or by
another NTP server. The stratum is the position of the NTP server in the hi-
MAN_SICAM_Q100_US.book Page 443 Wednesday, June 5, 2019 9:31 AM

Table of Contents

Related product manuals