Siemens SICAM Q100 7KG95 Series - Page 76

4 Measured Quantities and Recording
4.2 Measured Quantities
76 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
4.2.3.3 Recording and Evaluation of the Power Types
1)
Interfaces: protocols IEC 61850 (PQDIF depending on the measuring interval) and Modbus TCP; settable
aggregation times: 30 s, 60 s, 10 min, 15 min, 30 min, 1 h, 2 h.
Table 4-17 Recording and Evaluation of the Power Types
Measured Quantity
Measurement Recorder
1)
AVG Max. Value Min. Value
PQDIF, CSV
Active Power
Pa xxx
Pb xxx
Pc xxx
P xxx
Reactive Power
Qa xxx
Qb xxx
Qc xxx
Q xxx
Apparent Power
Sa xxx
Sb xxx
Sc xxx
S xxx
Reactive Power (Fundamental)
Q1axxx
Q1bxxx
Q1cxxx
Q1 xxx
NOTE
The load profile is recorded separately. See the explanations in the chapter 5.1.3.
MAN_SICAM_Q100_US.book Page 76 Wednesday, June 5, 2019 9:31 AM