6 Security
6.2 Account Management
96 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
6.2 Account Management
6.2.1 Function Description
The SICAM Q100 device provides a role-based access control (RBAC) mechanism for account management.
This function is a policy-neutral mechanism for access control to define the roles and privileges. With the RBAC
mechanism, the permissions to perform certain actions on the SICAM Q100 device are assigned to specific
roles.
Creating User Accounts
There is no default user account or default password provided for a newly delivered SICAM Q100 device. After
the newly delivered SICAM Q100 device boots up, you are required to create an initial user account with an
administrator role or a user account manager role on the Web UI.
Afterwards, you can log on with the created role and get access to Account management to create, change, or
delete the user accounts for the following roles:
•Viewer
• Operator
• Engineer
• Installer
• Security administrator
• Security auditor
• User account manager
• Administrator
• Backup operator
• Guest
The following table contains the access rights to different roles in the SICAM Q100 device:
MAN_SICAM_Q100_US.book Page 96 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
