6 Security
6.2 Account Management
98 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
HMI Password
The SICAM Q100 device provides an option to use an HMI password. It determines whether the password for
actions at the device display is activated or deactivated. The HMI password is activated by default.
• If the HMI password is deactivated, all actions at the device display can be executed without entering a
password.
• If the HMI password is activated, you must enter a configured password to start actions at the device dis-
play.
6.2.2 Configuration via User Interface
Creating an Initial User Account
Figure 6-1 Creating an Initial Account
To create an initial user account, proceed as follows:
✧ In the Log on tab of the Web UI page, select Administrator or User Account Manager from Account
Type.
NOTE
Only a user with the role of administrator, security administrator, or user account manager has the permission
to access the Account management.
MAN_SICAM_Q100_US.book Page 98 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
