Connection with SICAM PQS
3.4 Settings in SICAM PQS
105SICAM Q100, 7KG95xx, System Manual
E50417-C1040-C522-A8, Edition 09.2020
✧ In the navigation window right-click SICAM PAS PQS Computer name (in the example:
e312n-002010) Application IEC 61850 Client.
Figure 3-10 Selection of the IEC 61850 Client
✧ If necessary, change the name of the IEC 61850 client in the General Parameters window.
NOTE
The archive is needed to store measurements recorded by SICAM Q100 which enables SICAM PQ Analyzer
to present them.
SYS_SICAM_Q100_US.book Page 105 Thursday, September 24, 2020 1:17 PM
To Next Page
Loading...
