Siemens SICAM Q100 - Graphic Display in PQ Analyzer

Connection with SICAM PQS
3.6 Graphic Display in PQ Analyzer
116 SICAM Q100, 7KG95xx, System Manual
E50417-C1040-C522-A8, Edition 09.2020
3.6 Graphic Display in PQ Analyzer
To display records graphically, you require the PQ Analyzer in SICAM PQ.
✧ Start the PQ Analyzer in SICAM PQ as follows:
Figure 3-24 Starting PQ Analyzer
Example of Displaying Fault Records
The PQ Analyzer window opens with a list of the COMTRADE data.
✧ Select the fault record you want to display graphically and click open.
Figure 3-25 Window of the PQ Analyzer
✧ Click Open.
NOTE
You receive detailed information about the PQ Analyzer in the manual of the PQ Analyzer.
SYS_SICAM_Q100_US.book Page 116 Thursday, September 24, 2020 1:17 PM