Communication
2.1 Communication Interfaces
17SICAM Q100, 7KG95xx, System Manual
E50417-C1040-C522-A8, Edition 09.2020
Location of the RS485 Interface on the Device
The RS485 interface is located on the terminal side.
Figure 2-4 D-Sub Connector Plug of SICAM Q100
NOTE
The pinout of the D-sub connector plug is described in Device Manual SICAM Q100, chapter 13.
SYS_SICAM_Q100_US.book Page 17 Thursday, September 24, 2020 1:17 PM
To Next Page
Loading...
