7 Connection Principle
7.1 Terminals
104 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
7.1 Terminals
The terminals on the terminal side of the device are designed as terminal blocks:
Figure 7-1 Terminal Blocks on the Terminal Side of the SICAM Q100
SICAM Q100 has the following terminal blocks:
Table 7-1 Terminal Blocks at SICAM Q100
Terminal Block Description
E 4 inputs for alternating current measurement
F 4 inputs for alternating voltage measurement
G 2 binary outputs
H Supply voltage
U 2 binary inputs
To Next Page
Loading...
