Siemens SICAM Q100 - Starting the User Interface During Operation

8 Operation at Use of a PC
8.2 Start and Design of the User Interface
124 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
8.2.8 Starting the User Interface during Operation
Starting the User Interface
To start the user interface, proceed as follows:
✧ Start Microsoft Internet Explorer.
✧ Enter the IP address in Microsoft Internet Explorer (for example the default IP address: 192.168.0.55) of
SICAM Q100 and press ENTER.
✧ Enter the logon password (default password is 000000) and click Log on.
Figure 8-8 Log on via the User Interface
The user interface opens with the Information tab  Show device information item (see figure 8-9).