8 Operation at Use of a PC
8.3 Configuration of the Device
198 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
Scan cycle for measured values 50 (* 10 ms) 0 to 36 0000 * 10 ms
(10 ms to 1 h)
0 = each request cycle
Minimum time difference between the
measured-value requests.
Scan cycle for indications 0 (* 10 ms) 0 to 36 0000 * 10 ms
(10 ms to 1 h)
0 = each request cycle
Minimum time difference between the in-
dication requests.
Scan cycle on error 5 s 1 to 3600 s
( 1 s to 1 h)
Retry cycle for sending request tele-
grams if the retry limits are exceeded or
in the case of error responses.
Buttons:
Import
Export
Measured values 1-8 and 9-15
Indicatons
inactive The buttons in the Mapping columns are
only activated if the option Activated =
yes has been set. The functions of the
buttons are described in the chapters
8.3.7.4.2 to 8.3.7.4.5.
Table 8-24 Settings of the Modbus slave device 1
Parameter Default Setting Setting Range
To Next Page
Loading...
