8 Operation at Use of a PC
8.4 Value View and Evaluation
226 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
8.4.1.2 Evaluation of Binary Status
The status of the binary inputs and outputs is checked and displayed as follows:
Figure 8-77 Binary Status
Status Binary Input – Terminals U1/2 and U3/2
Depending on the parameterization (for routing, see chapter 8.3.3.1.2), either the status information or the
source is evaluated.
Status Binary Output – Terminals G1/2 und G3/2
Depending on the parameterized source type (see chapter 8.3.3.1.3), the indications routed to the binary
outputs and/or power meters are evaluated.
To Next Page
Loading...
