8 Operation at Use of a PC
8.4 Value View and Evaluation
234 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
8.4.2.1 Events
Default Settings and Setting Options
1)
For RVC event, there is no CSV or diagram available.
To display the values on the screen, proceed as follows:
✧ In the navigation window, select the Evaluation and data management menu and click Events.
Figure 8-84 Value View Tab and Evaluation, Events Input/Output Window, Supply Voltage
✧ Select the desired Event record type in the list box according to Table 8-36 and specify the Start time
and End time using the calendar function.
Table 8-36 Value View and Evaluation - Events
Parameter Default Setting Setting Options
Event record type Supply Voltage Voltage event
Frequency event
Voltage-unbalance event
RVC event
1)
Start time Current date/time Any with calendar function
Time format: depends on date/time format config.
End Time Current date/time Any with calendar function
Time format: depends on date/time format config.
Measurement output Table Table
CSV
To Next Page
Loading...
