8 Operation at Use of a PC
8.5 Maintenance
249SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
8.5 Maintenance
In the Maintenance tab you can start the following functions:
• Update the firmware
• Format SD card
• Make various presettings
• View and delete logs
• View and delete transients
• Analyze protocol-specific communication data
If you want to edit this tab, you need the Maintenance password.
To open the Maintenance tab, proceed as follows:
✧ Select the Maintenance tab on the user interface.
Figure 8-96 Maintenance Tab
To Next Page
Loading...
