8 Operation at Use of a PC
8.5 Maintenance
252 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
8.5.2 Formatting the SD Card
If you want to format the SD card, proceed as follows:
✧ Click on Format SD card in the navigation window.
Figure 8-99 Maintenance Tab, Format SD card
✧ Enter the maintenance password in the Password field.
✧ Click on Enable Format SD card.
Observe the warning on the Format SD card tab.
✧ Click on Format SD card.
The SD card is formatted and the following message appears:
Figure 8-100 Maintenance Tab, Format SC card Completed
✧ Follow the instructions in the message.
Observe messages that can appear if no or a faulty SD card is used.
NOTE
When you format the SD card, all recorded data will get lost. If you want to preserve the data, save them before
formatting as described in chapter 8.4.2.1, File Download -> Save CSV File, and chapter 8.4.2.5.
To Next Page
Loading...
