8 Operation at Use of a PC
8.5 Maintenance
258 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
8.5.4.2 Error Logs
To view and clear the Error log (max. 128), proceed as follows:
✧ In the navigation window, select the Message Logs menu and click Error log.
Figure 8-107 Maintenance Tab, Delete Error Log
✧ Enter the maintenance password into the Password field.
✧ Click Delete log in the input/output window.
All error messages in the input/output window are deleted without backup. The indication no. 0001
appears in the log list: ***Error Log Cleared***.
NOTE
Error messages are service information that you quote to the service department upon request in case of an
error.
NOTE
If you need the error messages, for example for subsequent analysis, save or print them out as described in
chapter 8.2.8.2.
To Next Page
Loading...
