Siemens SICAM Q100 - Page 270

8 Operation at Use of a PC
8.7 Example of a Parameterization and Measured Value Evaluation
270 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
✧ Configure a limit violation indication on the Configure tab, Limits 1-8 item (see chapter 8.3.3.2) as
follows:
Figure 8-117 Configure Tab, Limits Example
✧ Configure binary output G1/2 on the Configure tab, Binary outputs item (see chapter 8.3.3.1.3) as
follows:
Figure 8-118 Configure Tab, Binary Outputs Example