Siemens SICAM Q100 - Measured Quantities Submenus

9 Operation at Use of the Display
9.4 Parameterization
284 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
9.4.2 Measured Quantities Submenus
Submenu Display Number 1 through 11, 20 and 25: Measured Quantities
• Voltage Vph-n, Voltage Vph-ph
• Current I
• Active Power P, React. Power Q, App. Power S, Total Power P, Q, S
• Power factor PF, Tot. Pwr.factor PF tot
•cos 
• Frequency f
• Phase unbal. Vnb, Inb
Figure 9-7 Submenus of the Display Numbers 1 to 11, 20 and 25, Various Measured Quantities
Submenu Display Number 12 and 13: THDS Voltage and THDS Current
Figure 9-8 Submenu Display Number 12 and 13, THDS V and THDS I
Submenu Display Number 14: Phasor Diagram
Figure 9-9 Submenu Display Number 14, Phasor Diagram
NOTE
To return to the main menu from within any submenu, press the F4 Menu softkey.
1 to 11, 20, 21
Measur ement
1.0 to 11. 0, 20.0, 21.0
Instantaneous
measur ement
1.1 to 11.1, 20.1, 21.1
Maximum
1.2 to 11.2, 20.2, 21.2
Minimum
Enter
Max
Min
Inst.
Menu
12, 13
THDS-V
THDS-I
12.0, 13.0
THDS-Vph-n
THDS-I
12.1, 13.1
THDS-Vph-n max
THDS-I max
Enter Max Inst.
Menu
14
Phasor diagram
14.0
Graphic
Phasor diagram
14.1
Table
Phasor diagram
Enter Tab. Graph
Menu