Siemens SICAM Q100 - Page 291

9 Operation at Use of the Display
9.4 Parameterization
291SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
Submenu Display Number 32.5: Date/Time
Figure 9-22 Submenu Display Number 32.5, Date/Time
Table 9-5 Date/ Time Settings
Parameter Default Setting Setting Range
Time source internal internal
Ethernet NTP
Fieldbus
Date Current date setting according to format
Format YYYY-MM-DD24 YYYY-MM-DD24
YYYY-MM-DD12
DD.MM.YYYY24
DD.MM.YYYY12
MM/DD/YY24
MM/DD/YY12
Time Current time setting according to format
Time zone 00:00 -12 to +13 (hours)
(in increments of 0.5 h)
32.4
Date/Time
32.5
Time source
Enter
32.5
Date
Edit
+
-
Edit
32.5
Format
Edit


Select. parameters acc .
to following table
Ok
32.5
Time
Edit
32.5
Time zone
Edit
Esc
