12 Failures and LED Indications
12.2 Commissioning during Failures
311SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
✧ Keep the softkey F4 pressed until the LEDs ERROR (red) and H2 (yellow) are lit (LEDs RUN (green) and
H1 (yellow) are off).
✧ Release the softkey F4.
SICAM Q100 starts the Boot Loader with the Boot Loader HTML page (see Figure 12-1).
To Next Page
Loading...
