Siemens SICAM Q100 - Indications Signaled by LEDs

12 Failures and LED Indications
12.3 Indications Signaled by LEDs
312 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
12.3 Indications Signaled by LEDs
SICAM Q100 automatically monitors the functions of its hardware, software, and firmware components. The
LEDs on the top side of the housing and on the display side (only in devices with display) indicate the current
device status.
Designation of the LEDs on the Top Side of Housing
Figure 12-4 Designation of the LEDs on the Top Side of Housing
Designation of the LEDs on the Display Side
Figure 12-5 Designation of the LEDs on the Display Side
RUN
H1
H2
ERROR
Speed
Link/Activity
RUN
H1
H2
ERROR