12 Failures and LED Indications
12.3 Indications Signaled by LEDs
313SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
Meaning of the LEDs
LED (green, red, yellow): on
LED (green, red, yellow): flashes
LEDs H1/H2/ERROR: according to parameterization
LED: off
LED Speed (yellow):
off: 10 Mbit/s
on: 100 Mbit/s
LED Link/Activity (green):
LED on: Ethernet link is up
LED flashing: Ethernet link is up and data is transferred
LED off: no Ethernet partners connected
NOTE
The designations and functions of the LEDs on the top side and on the display side of the housing are identical.
Therefore, only the LEDs on the top side of the housing are described in the following table.
Table 12-1 Indications Signaled by LEDs on the Top Side of the Housing
LED Meaning
Device switched off
No firmware loaded
Boot Loader
F4 softkey was pressed while switching on the supply voltage (calling default
IP address).
To Next Page
Loading...
