14 Operational Indications
336 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
1) The SD card has no contact or is defective; you must not replace the card yourself. The device also works
without active SD card. However, data storage when operating the recorders is not possible. In this case,
the recorder data can be forwarded and processed only via communication.
Load Profile Period
Closed
Indication that a period has been
closed.
Only Indication on is logged.
Load Profile Synchr.
Period
Indication that synchronization
signal was received.
Only Indication on is logged.
Load Profile Tariff x Indication that the tariff x has been
set.
Only Indication on is logged.x = 1 to 4
Load Profil Reset
Buffer
Indication that the load-profile
buffer was deleted.
Load-profile buffer was deleted by user's action or
parameter change.
Only Indication on is logged.
Indication Description Notes
To Next Page
Loading...
