Siemens SIDOOR ATD4 W Series - Page 250

Article number 6FB1112-0AT20-2TR0
IP degree of protection IP54
Standards, approvals, certi󹪝cates
CE mark Yes
EAC (formerly Gost-R) Yes
RoHS conformity Yes
China RoHS compliance Yes
Standard for EMC EN 12015 / EN 12016 / EN 61000-6-2 / EN
61000-6-3 / EN 61000-3-2 / EN 61000-3-3
Standard for safety Low Voltage Directive (LVD) 2014/35/EU
Ambient conditions
Ambient temperature during operation
• min.
-20 °C
• max.
55 °C
• Remark
No direct exposure to the sun
Ambient temperature during storage/transpor‐
tation
• Storage, min.
-20 °C
• Storage, max.
70 °C
• Transportation, min.
-40 °C
• Transportation, max.
70 °C
Altitude during operation relating to sea level
• Installation altitude above sea level, max.
2 000 m
Relative humidity
• No condensation, min.
10 %
• No condensation, max.
93 %
Cables
Cable length
• Input side
2 m
• Output side
1.5 m
Connection method
Design of electrical connection at input SCHUKO connector DIN 49.441, CEE7/VII
Design of electrical connection at output WAGO 721-103/026
Dimensions
Width 145 mm
Height 65 mm
Depth 126 mm
Power supply
7.2 SIDOOR TRANSFORMER
ATD4xxW for industrial applications
248 System Manual, 06/2022, A5E51901827B AA