• Maximum distance from the power supply on account of the cable length:
– SIDOOR NT40 / SIDOOR TRANSFORMER / SIDOOR TRANSFORMER UL: 1.5 m
• Maximum distance from the geared motor on account of the cable length:
– For SIDOOR M3, M4 and M5: 1.5 m
– With SIDOOR MDG3, MDG4, MDG5: 5m / 10m / 15m / 20m
(Length depends on the MDG cable used)
6,'225
ุPP
ุPP
ุPP
ุPP
WARNING
Risk of injury as a result of incorrect installation
Final application-specic requirements must be observed.
Only when installed horizontally outside a control cabinet in a
Controllers
5.2 Installing the control unit
ATD4xxW for industrial applications
128 System Manual, 06/2022, A5E51901827B AA
To Next Page
Loading...
