Siemens Simantic ET 200S - Page 161

Analog electronic modules
4.5 Parameters for analog electronic modules
ET 200S
Manual, Edition 10/2005, A5E00514527-01
4-31
Parameters Range of values Default setting Applicability
Temperature coefficient
• Pt 0.003850
• Pt 0.003916
• Pt 0.003902
• Pt 0.003920
• Pt 0.003851
• Ni 0.006180
• Ni 0.006720
• Ni 0.005000
• Cu 0.00427
Pt 0.003851 Channel
Measuring range
• 150 Ω
• 300 Ω
• 600 Ω
• 3000 Ω
• PTC
• Pt100 Climatic
• Ni100 Climatic Range
• Pt100 Standard
• Ni100 Standard
• Pt500 standard range
• Pt1000 standard range
• Ni1000 standard range
• Pt200 climatic range
• Pt500 climatic range
• Pt1000 climatic range
• Ni1000 climatic range
• Pt200 standard range
• Ni120 standard range
• Ni120 climatic range
• Cu10 climatic range
• Cu10 standard range
• Ni200 standard range
• Ni200 climatic range
• Ni500 standard range
• Ni500 climatic range
Pt100 Standard Channel
1
Wire break diagnostic is disabled if - Type of measurement = "deactivated" or Measuring Range = "PTC" was assigned.