Analog electronic modules
4.13 2AI I 2/4WIRE High Feature analog electronic module (6ES7134-4MB00-0AB0)
ET 200S
Manual, Edition 10/2005, A5E00514527-01
4-67
2AI I 2/4WIRE High Feature Technical Specifications (6ES7134-4MB00-0AB0)
Dimensions and Weight
Dimensions W × H × D (mm)
(the total dimensions depend on the selected
terminal module)
15 x 81 x 52
Weight Approx. 40 g
Data for specific modules
Supports isochronous operation no
Number of inputs 2
Cable length
• Shielded
max. 200 m
Parameter length 4 bytes
Voltages, currents, potentials
Rated load voltage L+ (from the power
module)
24 VDC
• Reverse polarity protection
Yes
Power supply of the transmitters Yes
• Short-circuit protection
Yes, 60 mA (for both channels)
Galvanic isolation
• Between the channels and backplane
bus
Yes
• Between the channels and load voltage
L+
Yes
• Between the channels and PE
Yes
• Between the channels
no
Permissible potential difference
• Between the channels
140 VDC/100 VAC (with isolated power supply for the
measuring transducer)
Insulation tested 500 VDC
Current consumption
• From load voltage L+
max. 53 mA
Power dissipation of the module Typically 0.85 W
Status, interrupts, diagnostics
Diagnostics function
• Group error
Red "SF" LED
• Diagnostic functions readable
Yes
Analog value generation
Measuring principle Integrative
Integration and cycle time/resolution per
channel:
• Integration time can be assigned
parameters
Yes
• Interference frequency suppression in Hz
60 50 no
• Integration time in milliseconds
16.67 20 7.5
• Conversion time in ms
– 1 channel active per module
– 2 channels active per module
25
58.3
30
70
10
26
• Cycle time in ms
– 1 channel active per module
– 2 channels active per module
75
175
90
210
30
78
• Resolution (including overrange)
± 20 mA/15 bits + sign
4 mA to 20 mA/15 bits
To Next Page
Loading...
