Analog electronic modules
4.21 2AO I Standard analog electronic module (6ES7135-4GB01-0AB0)
ET 200S
Manual, Edition 10/2005, A5E00514527-01
4-105
2AO I Standard Technical Specifications (6ES7135-4GB01-0AB0)
Dimensions and Weight
Dimensions W × H × D (mm)
(the total dimensions depend on the selected
terminal module)
15 x 81 x 52
Weight Approx. 40 g
Data for specific modules
Supports isochronous operation no
Number of outputs 2
Cable length
• Shielded
max. 200 m
Parameter length 7 bytes
Voltages, currents, potentials
Rated load voltage L+ (from the power
module)
24 VDC
• Reverse polarity protection
Yes
Galvanic isolation
• Between the channels and backplane bus
Yes
• Between the channels and load voltage
Yes
• Between the channels
no
Permissible potential difference
• Between MANA and the central grounding
point (U
iso
)
75 VDC / 60 VAC
Insulation tested 500 VDC
Current consumption
• From the power supply L+
max. 150 mA
Power dissipation of the module max. 2 W
Status, interrupts, diagnostics
Diagnostics function
• Group error
Red "SF" LED
• Diagnostic functions readable
Yes
Analog value generation
Resolution (including overrange) ± 20 mA/13 bits + sign
4 mA to 20 mA/13 bits
Cycle time max. 1.5 ms
Settling time
• For resistive load
0.1 ms
• For capacitive load
0.5 ms
• For inductive load
0.5 ms
Substitute values can be applied Yes
To Next Page
Loading...
