Siemens SIMATIC ET 200AL - Page 271

Digital input module DI 8x24VDC 4xM12 (6ES7141-5AF00-0BA0)
20 Manual, 02/2016, A5E36680963-AA
Technical specifications
6
6.1
Technical specifications
Technical specifications of the DI 8x24VDC 4xM12 digital input module
6ES7141-5AF00-0BA0
General information
Product type designation
DI 8X24VDC, 4XM12
Hardware functional status
E01
Firmware version
V1.0.x
Product function
I&M data
Yes; I&M0 to I&M3
Engineering with
STEP 7 TIA Portal can be configured/integrated
as of version
As of STEP 7 V13 SP1
STEP 7 can be configured/integrated as of version
V5.5 SP4 Hotfix 7 or higher
PROFIBUS as of GSD version/GSD revision
GSD as of revision 5
PROFINET as of GSD version/GSD revision
GSDML V2.3.1
Supply voltage
Load voltage 1L+
Rated value (DC)
24 V
Low limit of permitted range (DC)
20.4 V
High limit of permitted range (DC)
28.8 V
Reverse polarity protection
Yes; against destruction; encoder supply outputs
are connected with reverse polarity
Input current
Current consumption (rated value)
25 mA; no load
From load voltage 1L+ (unswitched voltage)
4 A; maximum value
From load voltage 2L+, max.
4 A; maximum value
Encoder supply
Number of outputs
4
24 V encoder supply
Short-circuit protection
Yes; per module, electronic
Output current, max.
0.7 A; total current of all encoders
Power loss
Power loss, typ.
1.9 W
Digital inputs
Number of inputs
8
Input characteristic curve a
cc. to IEC 61131,
type 3
Yes