Siemens SIMATIC ET 200eco PN M12-L - Page 37

Technical specifications
Communication module CM 8x IO-Link + DI 4x24VDC M12-L (6ES7148-6JG00-0BB0
36 Equipment Manual, 09/2020, A5E49284833-AA
Article number
6ES7148-6JG00-0BB0
• Output current, max.
0.5 A; Per channel
Power loss
Power loss, typ.
5.5 W
Address area
Address space per module
•
Inputs
265 byte; + 8 bytes for QI information
•
Outputs
256 byte
Hardware configuration
Submodules
•
Number of configurable submodules, max.
9
Digital inputs
Number of digital inputs
4
Source/sink input
P-reading
Input characteristic curve in accordance with
IEC 61131, type 3
Yes
Number of simultaneously controllable inputs
all mounting positions
–
up to 60 °C, max.
4
Input voltage
• Type of input voltage
DC
• Rated value (DC)
24 V
• for signal "0"
-3 to +5V
• for signal "1"
+11 to +30V
Input current
• for signal "1", typ.
2.5 mA
Input delay (for rated value of input voltage)
for standard inputs
–
at "0" to "1", max.
typically 3 ms
–
at "1" to "0", max.
typically 3 ms
Cable length
•
unshielded, max.
30 m
IO-Link
Number of ports
8
• of which simultaneously controllable
8
IO-Link protocol 1.0
Yes
IO-Link protocol 1.1
Yes
Transmission rate
4.8 kBaud (COM1); 38.4 kBaud (COM2), 230
kBaud (COM3)
Cycle time, min.
2 ms
Size of process data, input per port
33 byte
Size of process data, input per module
264 byte
Size of process data, output per port
32 byte