Siemens SIMATIC ET 200SP CM 1xDALI - Type-Related Parameters for Input Device

CM 1xDALI command list
3.4 Configuration
ET 200SP CM 1xDALI Communication Model Description
44 Programming Manual, 12/2019, A5E47581955-AA
3.4.20 Type-related parameters for input device
The following tables describe the type-related parameters for input devices:
Input device type 1 (push button)
Byte 7
Short press time
Byte 8
Double click time
Byte 9
Repeat time
Byte 10 Stuck check time
Byte 11
Resolution
Byte 12
Minimum short press time
Byte 13
Minimum double click time
Input device type 2 (absolute input)
Byte 7 Deadtime: if the deadtime timer is set, the instance does not send out an event
until the deadtime timer has expired.
Byte 8 Report time: if the report timer is set, it triggers an event every T
report
even if the
“inputValue” is not changed.
Byte 9
Reserved
Byte 10
Reserved
Byte 11
Resolution
Byte 12
Reserved
Byte 13
Reserved
Input device type 3 (occupancy)
Byte 7
Hold time
Byte 8
Report time
Byte 9
Deadtime
Byte 10
Reserved
Byte 11
Resolution
Byte 12
Reserved
Byte 13 Reserved
Input device type 4 (light sensor)
Byte 7
Hysteresis band
Byte 8
Hysteresis minimum
Byte 9
Report time
Byte 10 Deadtime
Byte 11
Resolution
Byte 12
Reserved
Byte 13
Reserved