Programming
5.7 Configuration function blocks
ET 200SP Communication module CM 1xDALI (6ES7137-6CA00-0BU0)
100 Manual, 06/2019, A5E46959434-AA
DALI_DEV_UPLOAD
Description
DALI_DEV_UPLOAD
is used for uploading all the parameters of the DALI device and saving
them in the CM 1xDALI (refer to data flow path 4 (Page 23)).
After this function block is executed without errors, the DALI device is marked as configured,
and the setting parameters are saved in the CM 1xDALI.
It takes some time to execute this function block. If needed, you can use CANCEL to stop
the procedure before it is finished.
Note
The output resets, only if both the CANCEL and UPLOAD are set to 0.
To Next Page
Loading...
