Siemens SIMATIC ET 200SP HA - Culus Approval; Culus HAZ. LOC. Approval; Cfmus Approval; Marking for Australia and New Zealand

9.1.4 cULus approval
Underwriters Laboratories Inc., complying with
● UL 61010-2-201 (Industrial Control Equipment)
● CSA/ CAN 61010-2-201 (Process Control Equipment)
9.1.5 cULus HAZ. LOC. approval
Underwriters Laboratories Inc., complying with
● UL 61010-2-201 (Industrial Control Equipment)
● CSA / CAN 61010-2-201 (Process Control Equipment)
● ANSI/ISA 12.12.01
● CSA C22.2 No. 213 (Hazardous Location)
APPROVED for use in
Class I, Division 2, Group A, B, C, D Tx;
Class I, Zone 2, Group IIC Tx
9.1.6 cFMus approval
Factory Mutual Research (FM) according to
Approval Standard Class Number 3611, 3600, 3810 (ANSI/ISA 82.02.01)
CSA C22.2 No. 213
CSA C22.2 No. 61010-1
APPROVED for use in Class I, Division 2, Group A, B, C, D Tx;
Class I, Zone 2, Group IIC Tx
Table 9-1 Factory Mutual Research (FM) certification
FM certification
Classification NI, Class I, Div 2, Groups A, B, C and D
NI, Class I, Zone 2, Groups IIC
Standards Class No. 3600:2018
Class No. 3611:2018
Class No. 3810:2018
ANSI/ISA-61010-1:2015
9.1.7 Marking for Australia and New Zealand
The ET 200SP HA distributed I/O system fulfills the requirements of the EN 61000‑6‑4 standard.
R
R
HA Z . LOC .
Technical specifications
9.1 Standards and approvals
ET 200SP HA Distributed I/O system
136 System Manual, 08/2019, A5E39261167-AD