Siemens SIMATIC ET 200SP HA - Page 53

Article number 6DL1134-6UD00-0PK0
• Address space per module, max.
9 byte; 8 bytes for inputs and 1 byte for QI infor‐
mation
• Address space per module with HART, max.
29 byte; 8 bytes for inputs, 1 byte for QI informa‐
tion, 20 bytes for HART information
• Address space per module with MultiHART,
max.
16 byte; 8 bytes for inputs, 1 byte for QI informa‐
tion, 6 bytes for HART information, 1 byte for HART
command
Analog inputs
Number of analog inputs 4
• For current measurement
4
permissible input current for current input (de‐
struction limit), max.
24 mA
Input ranges (rated values), currents
• 0 to 20 mA
Yes; 16 bit incl. sign
– Input resistance (0 to 20 mA)
250 Ω
• 4 mA to 20 mA
Yes; 16 bit incl. sign
– Input resistance (4 mA to 20 mA)
250 Ω
Cable length
• shielded, max.
800 m; with unshielded cables up to 800 m, re‐
member that (external) EMC loads can cause incor‐
rect measured values
Analog value generation for the inputs
Integration and conversion time/resolution per
channel
• Resolution with overrange (bit including
sign), max.
16 bit; 14 bit at 60 Hz (0 ... 10 mA), 16 bit at 10 Hz,
15 bit at 50 Hz and 15 bit at 60 Hz interference
suppression
Smoothing of measured values
• parameterizable
Yes; none, weak, medium, strong, channel-by-
channel
Encoder
Connection of signal encoders
• for current measurement as 2-wire transduc‐
er
Yes
Errors/accuracies
Linearity error (relative to input range), (+/-) 0.01 %
Temperature error (relative to input range), (+/-) 0.005 %/K
Crosstalk between the inputs, min. 60 dB
Repeat accuracy in steady state at 25 °C (relative
to input range), (+/-)
0.05 %
Operational error limit in overall temperature
range
• Current, relative to input range, (+/-)
0.5 %
Basic error limit (operational limit at 25 °C)
• Current, relative to input range, (+/-)
0.1 %
Interrupts/diagnostics/status information
Technical speci󹪝cations
8.1 Technical speci󹪝cations
AI 4xI 2-/4-wire HART ISOL HA
Equipment Manual, 07/2022, A5E50101523-AB 53