Siemens SIMATIC ET 200SP HA - Page 26

"Redundancy" tab
De󹪝ne additional settings on the "Redundancy" tab for redundant analog input modules.
Parameter Value range Default Re-parameterization
in RUN
E󹪟ciency range
"Redundancy General Settings" group
Selection box "Redundancy
(Page 33)"
• None
• 2 modules
None No Redundant modules
Parameters/address space
5.3 Module/channel parameters
F-AI 8xI 2-/4-wire HART HA
26 Equipment Manual, 09/2021, A5E50557845-AA