Siemens SIMATIC ET 200SP IM 155-6 PN/2 HF - Page 20

Product overview
2.2 Functions
Interface module IM 155-6 PN/2 HF (6ES7155-6AU01-0CN0)
Manual, 10/2018, A5E03915895-AH
19
You can find more information on this topic in the STEP 7 online help and
● As of STEP 7 (TIA Portal) V12, in the function manual PROFINET with STEP 7
(http://support.automation.siemens.com/WW/view/en/49948856).
● As of STEP 7 V5.5, in the system manual PROFINET System Description
(http://support.automation.siemens.com/WW/view/en/19292127).
Compatibility with the IM 155-6 PN interface module
In an existing plant, the IM 155-6 PN/2 HF replaces the IM 155-6 PN ST without
reconfiguration. When the IM 155-6 PN/2 HF replaces the IM 155-6 PN ST, it is possible to
insert and remove several I/O modules during operation.
For more information on compatibility, refer to section: Compatibility (Page 48)
See also
ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293)
PROFINET with STEP 7 (http://support.automation.siemens.com/WW/view/en/49948856)