Siemens SIMATIC ET200SP PS 6EP7133-6AB00-0BN0 24 V/5 A - Other Mounting Positions; 6 Ep7133-6 Ab00-0 Bn0

Mounting position, mounting clearances
4.2 Other mounting positions
SIMATIC ET200SP PS
20 Manual, 03.2018, A5E43207434
4.2
Other mounting positions
For mounting positions that deviate from the standard mounting position, derating factors
(reduction of the output power or the permissible ambient temperature) must be observed in
accordance with the following diagrams.
Note
In the case of mounting positions that deviate from the standard mounting position, reduced
mechanical resistance of the devices against vibration and shoc
k must be expected.
Particularly when installing on a vertically fastened standard mounting rail, additional
measures may be required, e.g. to prevent the device from slipping on the standard
mounting rail.
4.2.1
6EP7133-6AB00-0BN0
Figure 4-3 Mounting position (2)
Note
Other mounting positions are not permissible!