Human-machine Interface
8-12
FM 353 Stepper Drive Positioning Module
6ES7 353-1AH01-8BG0
Description of the individual screens
The following illustration shows the screen layout of the preconfigured interface.
FM 353
Fig. 8-4 Screen layout of the preconfigured interface
The illustrations shown below (Fig. 8-5 to Fig. 8-19) provide you with the screen
content of the configured screens.
Para Autom MDI BA_An IBN Diag Anwen
FM 353
Fig. 8-5 Main screen, PIC7
This screen is displayed to you after the OP 17 is enabled. The FM353 values are
display values. The soft keys (F1 - F8) are used to request the continuation
screens. The first and last soft keys (User) are kept free for the user to insert his/
her own screens (e.g. including additional FMs).
FM 353
Tipp Steu Refpk SMR MDI AutoE Autom
Frq.−Stufe1
Frq.−Stufe2
Hz
Hz
Fig. 8-6 Operating mode selection, PIC75
This screen permits you to enter the operating mode, velocity levels or control lev-
els or the incremental value.
To Next Page
Loading...
