Siemens SIMATIC HMI Unified Comfort MTP700 - Communication with controllers

Technical information
8.10 Communication with controllers
Unified Comfort Panels
162 Operating Instructions, 03/2020, A5E46641217-AA
8.9.5 USB X61/X62/X63/X64
USB Type A
Pin
Name
Meaning
1
VBUS
+5 V, fused
2
D-
Data channel USB 2.0, bidirectional
3
D+
Data channel USB 2.0, bidirectional
4
GND
Ground
5
RX-
Data input USB 3.1
6
RX+
Data input USB 3.1
7
GND
Ground
8
TX-
Data output USB 3.1
9
TX+
Data output USB 3.1
8.10 Communication with controllers
Number of connections
The Unified Comfort Panels support a maximum of 16 connections to S7 controllers and 16
parallel connections via SIMATIC HTTP Protocol.
Controllers
The following controllers and communication drivers are supported by the HMI devices:
● SIMATIC S7-1500
● SIMATIC S7-1200
● SIMATIC S7-300/400
● SIMATIC S7-200
● LOGO!
● SIMOTION
● SIMATIC HTTP protocol
Additional controllers and communication drivers are supported via CSP. You can find the
CSPs for download on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/109739698). Observe the
documentation in the respective download.