Siemens SIMATIC HMI Unified Comfort MTP700 - Control Keys on the Screen Keyboard

Operating the device
4.4 Using the screen keyboard
Unified Comfort Panels
66 Operating Instructions, 03/2020, A5E46641217-AA
The levels and keys of the floating keyboard correspond to the levels and keys of the
alphanumeric keyboard.
To move the floating screen keyboard, drag the floating keyboard by its left bar to the
desired position.
You cannot enter data in the touch area of the graphic input level with the floating screen
keyboard.
4.4.2 Control keys on the screen keyboard
The following control keys are available on the screen keyboard:
Switch to lowercase level Switch to special character level 1
in a letter level
Switch to uppercase level Switch to special character level 2
in special character level 1.
Toggle language Switch to special character level 1
in special character level 2.
Delete character left of cursor Switch to the last letter level used
in a special character level
Switch to letter input in the graphic
input level
Switch to graphic input level Switch to numeric input in the
graphic input level
Switch to the last used letter
level in the graphic input level.
Close screen keyboard, confirm
input
Creates a "smiley" in the active
input box
Confirm entry, close the screen
keyboard
Creates three points in the
active input box