A-315
S7-CPs for Industrial Ethernet Configuring and Commissioning
Release 01/2007
C79000-G8976-C182-07
A
Access coordination, A-209
Address parameters
Broadcast, A-149
broadcast, A-148
unspecified ISO-on-TCP connection, A-129
unspecified TCP connection, A-137
unspecified UDP connection, A-145
Approval
CSA, A-290
FM, A-291
IEC 61131-2, A-287
standards and approvals, A-287
UL, A-289, A-290
AS-interface, A-16
Attaching the CPs to Ethernet, CP with
integrated switch, A-50
B
Block library, A-233
Block PN_InOut (FB88)
formal parameters, A-233
status codes, A-234
Block PNIO_ALARM, formal parameters,
A-257
Block PNIO_RECV (FC12), formal parameters,
A-245
Block PNIO_RW_REC, formal parameters,
A-252
Block PNIO_SEND (FC11), formal parameters,
A-239
Broadcast, with UDP, A-146
C
CE Mark, A-288
Commissioning, A-58
Communication options, A-17
Communication services, configuring, A-82
CONF_DB, A-227
Siehe auch configuration data block
Configuration data, download to target system,
A-87
Configuration data block, A-161, A-164
Connection, properties, A-103
Connection configuration, A-101
Connection ID, A-170
range of values, A-170
Connection types, parameter fields for, A-170
Connector for Industrial Ethernet, Pinning -
15-Pin Sub-D Female Connector, A-286
Connector for PROFIBUS, 9-pin D-sub female
connector, A-286
CP address, A-181
CP project engineering data, saving, A-88
Creating a subnet, A-61
CSA, approval, A-290
CSMA/CD, A-16
D
DHCP server, A-75
Diagnostics. Siehe NCM S7 Diagnostics
Displaying network attachments, A-67
Downloading, A-87
Dynamic properties, A-121
E
E-mail connection, Parameter field for, A-174
Ethernet, overview, A-16
Ethernet CP
commissioning, steps, A-60
further CP properties, A-69
time, A-70
F
FB, A-181
CP_CONFIG, A-161
IP_CONFIG, A-226
FCs for access coordination with
FETCH/WRITE, A-209
FETCH/WRITE services
configuration for ISO transport, A-154
overview, A-34
Firmware Loader
application, A-283
loading firmware, A-284
FM, approval, A-291
FTP connection, Parameter field for, A-176
To Next Page
Loading...
