Configuring / programming
9.3 PN/J1939 LINK assign parameters
SIMATIC PN/J1939 LINK
46 Operating Instructions, 12/2018, A5E45307564-AA
Follow these steps:
1. In the HW catalog
①, select a PN/J1939 LINK corresponding to a concrete article
number and double-click on it.
PN/J1939 LINK appears in the "Devices & networks" window.
2. Connect the CPU and PN/J1939 LINK via a PROFINET connection.
CPU and PN/J1939 LINK are linked via a green PN line
② in the "Devices & network"
window.
3. Configure the PROFINET interface of the PN/J1939 LINK
③ according to the conditions
of your PROFINET network.
Figure 9-1 Devices & networks
To Next Page
Loading...
