8-30
ET 200U Distributed I/O Station
EWA 4NEB 812 6087–02b
Digital Output Module 4 24 to 60 V DC / 0.5 A (6ES5 450–8MB11)
pr93a031
Technical Specifications
Address identifier for ET 200U
DP Siemens
DP Standard
048
8DQ or 032
Number of outputs
Galvanic isolation
in groups of
4
yes (optocoupler)
4
Load voltage L+
rated value
permissible range
24 to 60 V DC
20 to 72 V
Output current for “1” signal
rated value
permissible range
lamp load
0.5 A
5 mA to 0.5 A
max. 5 to 12 W
Residual current at “0” signal max. 1 mA
Short–circuit protection short–circuit protected
output with automatic
switch on when the
short–circuit does not
exist any more
Fault LED (red) short circuit or no sup-
ply L+
Error diagnostics possible
Voltage induced on circuit in-
terruption (internal) limited to
–30 V
Switching frequency
resistive load
inductive load
max. 100 Hz
max. 2 Hz
Total permissible current of
outputs
2 A
Driving of digital input possible
Paralleling of 2 outputs
maximum current
possible
2 0.4 A
Length of cable
unshielded
max. 100 m (330 ft.)
Rated isolation voltage
(+9 V to L+)
isolation group
tested with
60 V AC
2 B
500 V AC
Rated isolation voltage
(+9 V to )
isolation group
tested with
12 V AC
1 B
500 V AC
Current consumption
from +9 V (CPU)
from L+ (without load)
typ. 15 mA
typ. 30 mA (at 60 V)
Power loss of the module
Weight
typ. 5 W
approx. 200 g (7 oz.)
Module Spectrum
To Next Page
Loading...
