Siemens SIMATIC S5 ET 200U - 9.11 IP 266 Positioning Module (6 ES5 266-8 MA11)

9-58
ET 200U Distributed I/O Station
EWA 4NEB 812 6087–02b
9.11 IP 266 Positioning Module (6ES5 266–8MA11)
Technical Specifications
Address ID for ET 200U
 DP Siemens
 DP Standard
223
4AX or 243
Analog Output
Output signal range 10 V
Digital signal representation 13 bits plus sign
Short–circuit proof yes
Reference potential of the ana-
log output signal
analog ground of the
power section
Cable length shielded max. 32 m (105 ft)
Pulse Input
Position decoder incremental
Traverse range 32767.999 mm /
0.1 inch / degree
Input voltages for the tracks
 differential inputs
 asymmetrical inputs
5 V / RS 422
24 V / typ. 7.3 mA
Supply voltage for the sensor
(short–circuit proof)
5 V / 350 mA
24 V / 350 mA
Input Frequency and Cable Length
Symmetrical sensors (5 V) max. 500 kHz
max. 30 m (98 ft)
shielded cable length
Asymmetrical sensors (24 V) max. 100 kHz at 25 m
(82 ft) cable length
shielded
max. 25 kHz at 100 m
(330 ft) cable length
shielded
Input Signals 2 pulse series
90 degrees out of
phase
1 zero pulse
Function Modules