First Steps in Commissioning CPU 31xC: Positioning with digital output
Getting Started, 08/2011, A5E00105533-03
7
Preparation
2
Scope
These instructions apply to the following CPUs:
CPU SIMATIC Micro Memory Card
required for operation?
As of firmware
version
314C-2 DP yes V3.3
314C-2 PtP yes V3.3
314C-2 PN/DP yes V3.3
The order number can be found in the manuals, e.g. the operating instructions CPU 31xC
and CPU 31x: Installation (http://support.automation.siemens.com/WW/view/en/13008499
).
To Next Page
Loading...
