Siemens SIMATIC S7-300 Module data Hardware And Installation Manual

Commissioning
S7-300 Programmable Controller Hardware and Installation
A5E00105492-01
8-5
Module installation and wiring
Points to be examined refer to the
Installation
Manual;
Chapter ...
refer to the
Reference
Manual;
Chapter ...
Are all modules properly inserted and screwed in? 5 -
Are all front connectors properly wired, plugged, screw-
tightened or latched to the correct module?
5; 6 -
Mains voltage
Points to be examined refer to the
Installation
Manual;
Chapter ...
refer to the
Reference
Manual;
Chapter ...
Is the correct mains voltage set for all component? 6 Module Data:
2
Power supply module
Points to be examined refer to the
Installation
Manual;
Chapter ...
refer to the
Reference
Manual;
Chapter ...
Is the mains plug wired correctly? 6 -
Is mains voltage connected? - -

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)