Siemens SIMATIC S7-300 Module data Function Manual

03/2013 3 Setting up functions
3.7 Client-server communication
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
3-199
3.7 Client-server communication
3.7.1 Synchronization times
Function description
During synchronization, the specified configurations (e.g. for control monitors) are
transferred from the server to the control, and become effective. You can configure
an instant or interval when the machine will perform synchronization. You can also
define the synchronization mode and time zone, in which the machine is located.
Fig. 3-81: Synchronization times - List view
Fig. 3-82: Add synchronization (detail)
Function Description Type
Next
synchronization
Date of the next scheduled synchronization
of the machine with the current
configuration on the server.
DISPLAY
Online: All data is updated.
Offline: The machine is not
automatically synchronized
with the server settings.
Mode
standby: Only the synchronization
data is updated.
SELECTION
Synchronization
schedules
Several synchronization times can be
configured at the same time.
Creates a data record with new
synchronization settings.
ACTION
Edit a previously defined synchronization
data record.
ACTION

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)