Siemens SIMATIC S7-300 Module data Function Manual

03/2013 4 Organizational tasks
4.1 Maintenance
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
4-209
4.1.1 Selecting a maintenance job on a machine
Function description
Filter options are available for simple and fast searching to rationally process
maintenance jobs. Filters can be set to all of the information relevant to a
maintenance job.
The filter result corresponds to the selectable criteria in so much that for each
criteria group, all maintenance jobs appear in the result if a criterion is fulfilled (OR
logic operation).
The criteria groups are logically combined with one another so that the filter result
must correspond to each selected and active group (AND logic operation).
It can happen with an unfortunate selection that no maintenance job appears in the
filter result; e.g. display all new maintenance jobs, that are processed.
Cross-machine overview of the maintenance jobs
Fig. 4-1: Maintenance jobs

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)